TC110-H

Profile system for concealed fixing of brick tile cladding panels from different manufacturers using horizontal carrier rails.

A sub-structure system based on TC110-H is comprised of vertical L-shaped and T-shaped aluminium support profiles, horizontal carrier rails, wall brackets and optional accessories. According to thermal loading and demands – the wall brackets are made of aluminium or stainless-steel.

The cladding elements are fixed to the carrier profiles using a carrier rail adjusted for the manufacturer.

The carrier profiles are connected to the wall brackets using screws or rivets. When doing this, sliding points take up horizontal (wind) loads and fixed points take up horizontal and vertical loads (dead load). Constraint-free assembly is completed at the fixed points in vertical longitudinal holes. One fixed point is arranged for each carrier profile.

The wall brackets can optionally be fitted with an installation aide, which makes fixing and holding the carrier profile possible in order to simply working with them.

Horizontal system rails are fixed to the vertical sub-structure using screws or bolts, corresponding to the cladding grid.

Thermostop Elements are available as thermal dividers to minimise thermal bridging.

Protrusions of up to 480 mm.
Material EN AW-6063 T 66