TC110

Profile system for concealed fixing of Argeton facade panels, Moeding facade panels or NBK terracotta panels using clamp brackets.

A sub-structure system based on TC110 is comprised of vertical L-shaped and T-shaped aluminium support profiles, wall brackets and optional accessories. According to thermal loading and demands – the wall brackets are made of aluminium or stainless-steel.

The cladding elements are fixed using bracket clamps or a system rail and its clamps for these to the carrier profiles.

The carrier profiles are connected to the wall brackets using screws or rivets. When doing this, sliding points take up horizontal (wind) loads and fixed points take up horizontal and vertical loads (dead load). Constraint-free assembly is completed at the fixed points in vertical longitudinal holes. One fixed point is arranged for each carrier profile.

The wall brackets can optionally be fitted with an installation aide, which makes fixing and holding the carrier profile possible in order to simply working with them.

Thermostop Elements are available as thermal dividers to minimise thermal bridging.

Protrusions of up to 480 mm.
Material EN AW-6063 T 66

ⓘ

In connection with stainless steel wall brackets, a construction free of thermal bridges is possible.

Aluminium T-Profiles for Argeton
T 80 / 50
T 110 / 45
T 110 / 50

Aluminium L-Profiles for Argeton
L 42 / 50

Aluminium T-Profiles for Moeding
T 40 / 55
T 65 / 50
T 80 / 50
T 110 / 45
T 160 / 50

Aluminium L-Profiles for Moeding
L 42 / 50
L 45 / 45

Aluminium T-Profiles for NBK
T 110 / 45
T 160 / 50

System accessories for NBK
Clamp brackets NBK Terrart Light 24
Clamp brackets NBK Terrart Light 28
Clamp brackets NBK Terrart Mid
Clamp brackets NBK Terrart Large