ALWI-V
Profile system for concealed fixing of sidings or large-format facade panels, e. g. made of fibre cement, aluminium composite panels, ceramics or HPL.
A sub-structure system based on ALWI-V is comprised of vertical L-shaped and T-shaped aluminium support profiles, wall brackets and optional accessories. According to thermal loading and demands – the wall brackets are made of aluminium or stainless-steel.
The cladding elements are adhered to the support profiles, screwed on as concealed sidings or fixed with a system rail.
The carrier profiles are connected to the wall brackets using rivets, bolts or screws. When doing this, the sliding points take up the horizontal (wind) loads and fixed points take up horizontal and vertical loads (dead loads). Constraint-free assembly is achieved at the sliding points in vertical longitudinal holes. One fixed point is allocated per support profile.
The wall brackets can optionally be fitted with an installation aide, which makes fixing and holding the carrier profile possible and makes it easier to work with them.
Thermostop Elements are available as thermal dividers to minimise thermal bridging.
Protrusions of up to 480 mm.
Material EN AW-6063 T 66
Aluminium T-shaped profiles
|
T 40 / 55 |
T 65 / 50 |
T 80 / 50 |
T 110 / 45 |
T 110 / 70 |
Aluminium L-shaped profiles
|
L 40 / 50 |
L 42 / 50 |
L 42 / 60 |
L 45 / 45 |
L 70 / 50 |
ALWI-V with adhesive fixing
This profile system is suitable for use with cladding materials including
Alucobond, COSENTINO, Equitone, Fundermax, Novelis, Rieder, Swisspearl and Trespa.