UBE ECO

Profile system for concealed fixing of solar-thermally activated panels with bracket profiles on the back of the panel.

A sub-structure system based on UBE ECO is comprised of vertical T-shaped aluminium carrier profiles, wall brackets, optional accessories and horizontal support rails arranged at intervals along the cladding grid. According to thermal loading and demands – the wall brackets are made of aluminium or stainless-steel.

The carrier profiles are connected to the wall brackets using rivets or screws. When doing this, the sliding points take up horizontal (wind) loads and the fixed points take up horizontal and vertical loads (dead weight). The sliding points are mounted in vertical slots without constraint. One fixed point is allocated for each support profile.

At least four bracket profiles are required for each cladding element, which are fixed to the support profiles using screws.

We suspend the cladding elements in places using continuous agraffe profiles, which are fixed and secured to the reverse side of the cladding elements using welding studs.

The wall brackets can optionally be fitted with an installation aid, which makes fixing and holding the carrier profile easier.

Thermostop elements are available as a thermal break to minimise thermal bridges.

Protrusion up to 480 mm.
Material EN AW-6063 T 66
Aluminium T-profiles
T 80/50
T 140/65/2 for UBE ECO
Aluminium support profiles
Joint profile for UBE ECO
Carrier/bracket profile for UBE ECO 89,5×7,5
Bracket profile for UBE ECO 43/7,4
Bracket profile for UBE Tergo/ECO
Carrier/bracket profile58,5/20,6 for UBE Tergo/ECO
YouTube assembly video see here
Technical Drawings see here
Suitable wall brackets see here
Accessories see here

This profile system is suitable for use with all solar-thermally activated aluminium sheet panels.