TC110-V
Profile system for concealed fixing of vertically arranged terracotta panels.
A sub-structure system based on TC110-V is comprised of vertical L-shaped and T-shaped aluminium support profiles and special horizontal cap profiles, wall brackets and optional accessories. According to thermal loading and demands – the wall brackets are made of aluminium or stainless-steel.
The cladding elements are fixed to the support profiles with clamps.
The carrier profiles are connected to the wall brackets using rivets or screws. When doing this, sliding points take up horizontal (wind) loads and fixed points take up horizontal and vertical loads (dead weight). Constraint-free assembly is completed at the fixed points in vertical longitudinal holes.
One fixed point is arranged for each carrier profile.
The wall brackets can optionally be fitted with an installation aide, which makes fixing and holding the carrier profile possible in order to simply working with them.
Thermostop elements are available as a thermal dividers to minimise thermal bridges.
Protrusion up to 480 mm
Material EN AW-6063 T 66
|
Aluminium T-profiles
|
| T 40/70 |
| T 65/50 |
| T 100/50 |
| T 110/70 |
| T 120/50 |
|
Z-profile
|
| 30/15/50 |
|
Aluminium cap profiles
|
| TCH-S |
| TCH-M |
| 30/15/100/15/30 |
|
Special accessories for NBK
|
| Clamps NBK Terrart Mid |
| Clamps NBK Terrart Large |
TC110-V with horizontal clamps
TC110-V with vertical clamps
This profile system is suitable for use with cladding materials including
NBK and Moeding.